TECHNOLOGIES / CLEAN & CARE
Clean & Care:
Design for the whole wash.
Laundry involves removing what is unwanted and, where needed, delivering the intended fabric feel or other benefits. We use Clean & Care to structure those objectives.
Unimasses connects the product brief with formulation, delivery format and manufacturing: a direct-dose cleaning pod, a reconstituted refill or another appropriate route can be considered for each task.
Clean · Remove soil and stainsCare · Define the desired fabric resultDeliver · Match function, dose and stage
TWO JOBS IN ONE LAUNDRY ROUTINE
Remove what is unwanted.
Define the result after washing.
Clean / Removal. Define the soils to remove, the cleaning performance required and the conditions of the main wash. A liquid detergent or direct-dose pod can be selected according to the product objective.
Care / Refunction. Where the product brief calls for it, define the desired fabric feel or other properties. A separate conditioner can be delivered during the designated rinse stage.
Separation is a product-design option, not a requirement for every user or machine. Evaluate the complete routine against the intended performance, cost and ease of use.
FOLLOW THE FABRIC THROUGH THE CYCLE
Detergent helps lift soil and stains.
Conditioner is dosed at the designated rinse stage.
Assess both cleaning and the intended fabric feel and finish.
FROM PRODUCT OBJECTIVE TO PRODUCTION
Task + Delivery + Manufacturing
Define the job and the functional dose, select the delivery format, then design the manufacturing system needed to produce it.
01 · TASKDefine the function
ACDS begins with the cleaning or conditioning task, the required ingredients and the intended dose and use conditions.
02 · DELIVERYChoose the delivery
A direct-dose pod, a concentrate refill or a ready-to-use liquid can be evaluated according to the task and routine.
03 · MANUFACTURINGDevelop the system
Unimasses brings together formulation, film, pod structure, dosing technology and manufacturing requirements.
Wash-versus-rinse timing comes from the dosing method and machine programme. A separate chamber alone does not provide timed release.
FORMAT SELECTION / DIRECT DOSE OR REFILL
Different delivery paths.
One functional design principle.
Begin with the product objective, then compare the complete route: ingredients, stability, preparation, user dosing, production and distribution.
01 · DIRECT DOSEDirect-dose cleaning pods
Pre-measured liquid, powder or powder–liquid cleaning pods are designed for direct use in the main wash.
02 · REFILLConcentrate and recover
A refill is prepared with the specified water and container before use. Evaluate mixing, stability and dispensing.
03 · APPLYAppropriate dosing
The selected cap, pump or machine dispenser must deliver the intended dose at the correct stage of the routine.
High viscosity is not inherently necessary for machine washing. Define flow and dose accuracy around the chosen dispenser, user routine and formulation.
LAUNDRY APPLICATIONS
Cleaning and conditioning.
Designed as a coherent routine.
The product format and dosing method can differ for each task. Each application must be validated for its own use conditions.
01 · MAIN WASHLaundry cleaning pods
Liquid or powder–liquid pods can be developed around the target soils, dose, wash conditions and formulation economics.
02 · REFILLDetergent concentrate refills
A concentrated refill can be reconstituted for repeated dosing. Define the final concentration, preparation method and product stability.
03 · RINSEConditioning products
A separate conditioner or conditioner refill can be developed for the rinse when fabric feel, fragrance or static control is part of the brief.
FROM PRODUCT BRIEF TO VALIDATED SYSTEM
Define the fabric result.
Validate the complete routine.
Specify the soils, fabric types, desired after-wash properties, target water and wash conditions. Select a suitable delivery path for each task and evaluate its interactions with the complete routine.
Cleaning performance
Compare soil and stain removal at the intended dose, temperature and wash programme.
Fragrance
Where part of the brief, assess fragrance at defined stages and intervals.
Fabric feel
Evaluate the intended hand feel on relevant fabrics after drying.
Static and appearance
Test static control or appearance separately when included in the product target.
User and machine dosing
Evaluate preparation, dispenser compatibility and dose accuracy.
Compatibility and stability
Assess film, packaging, prepared-product stability and relevant fabric properties.
FROM IDEA TO DEVELOPMENT
Four decisions before
a product enters production.
01Define the task
Set the cleaning and, where relevant, conditioning result and benchmark.
02Choose dose and timing
Define what enters the main wash and what may be applied during the rinse.
03Select the format
Evaluate direct-dose pods, refills or another suitable delivery route.
04Validate and manufacture
Test performance, stability and usability; align materials and equipment with scale.
COMMON QUESTIONS
Questions about Clean & Care.
What is the difference between Clean & Care and ACDS?
Clean & Care structures the laundry tasks. ACDS guides how the functional ingredients are delivered for each task.
Must Clean & Care use two products?
No. Separate cleaning and conditioning products are one possible route. Suitability depends on the product goal, machine and user routine.
Can the cleaning product be a direct-dose pod?
Yes. A liquid, powder–liquid or other suitable pod can be developed for the main wash.
Does a multi-chamber pod automatically release at different stages?
No. Stage-specific release needs its own mechanism and validation; separating chambers alone does not guarantee it.
Is a thick reconstituted liquid necessary?
Not inherently. Viscosity should fit the formulation, dispenser, dose accuracy and user requirements.
Does Unimasses offer manufacturing support?
Depending on the project, Unimasses can discuss formulation, film, structure, equipment, prototypes and production implementation.
DEVELOP A LAUNDRY PRODUCT SYSTEM
Let’s design for the wash
and the rinse.
Tell us the target market, washing conditions, desired fabric results and production requirements. We can discuss a suitable product and manufacturing route.
[email protected]
Laundry Pod Development · Manufacturing Solutions
Español
Polski
Greek
Italiano
Turkish
简体中文
English
