Laundry pod technology

Solvent-Free Powder–Liquid Laundry Pods

Replace added propylene glycol in the liquid phase with a blend built around secondary alcohol-based nonionic surfactants. Add selected dry builders in a separate chamber and develop the complete dose for better cleaning and lower cost per wash.

POWDER–LIQUID POD CONCEPT

Surfactant liquid

Powder blend

Optional third chamber

NO ADDED PROPYLENE GLYCOL

SECONDARY ALCOHOL SURFACTANT BLEND

SEPARATE POWDER PHASE

Liquid formulation

Redesign the liquid phase around surfactants.

Propylene glycol can serve as a solvent in concentrated detergent liquids. Removing it can change the blend’s viscosity, phase stability, response to water-soluble film and dispersion in the wash. These properties need to be evaluated together.

Unimasses uses secondary alcohol-based nonionic surfactants as part of the liquid base, alongside other compatible surfactants. The blend is designed for both cleaning and workable liquid properties. Screen the combination for wetting, soil removal, foam, pumpability and dispersion in the target wash, including cold or short cycles where relevant.

Powder formulation

Give dry ingredients a defined role.

A separate powder chamber carries selected cost-effective salts without having to keep them dissolved or suspended in the concentrated liquid during storage.

Sodium carbonate

Provides alkalinity and supports detergency. Set the level with the target wash pH, water hardness, fabrics and residue performance in mind.

Sodium citrate

Works as a builder by binding some hardness ions. Its value depends on local water hardness and on how the rest of the formula manages calcium and magnesium.

Sodium sulfate

Can serve as a dry carrier or bulking ingredient when the blend needs it. Check powder handling, dissolution and its effect on finished-pod cost.

From formulation to cost per wash

Where better value can come from.

Use less solvent mass

Removing added propylene glycol opens space within the dose. Allocate that space to the surfactants and dry ingredients that earn their place in wash tests.

Match powders to the wash

Cost-effective dry builders handle alkalinity and hardness. Screen them alongside the surfactant blend for cleaning in the target market's water.

Control the two fills

Develop a pumpable liquid and a consistently dosed powder. Check how filling accuracy, seal quality and line yield affect the real cost of each pod.

Compare equivalent cleaning

Benchmark the complete pod against the current product. Include raw materials, film, filling, packaging and rejects when comparing cost per wash.

The best design is the one that meets the cleaning and shelf-life targets at the lowest practical cost per wash.

Powder–liquid chamber design

Two phases in one measured dose.

Start with a surfactant liquid and a dry powder blend. Add a third chamber when a separate ingredient or blend needs its own storage environment and the product benefits justify the extra fill.

Concentrated liquid chamber

Holds the surfactant blend and compatible liquid ingredients. Design for stable viscosity in storage, repeatable filling and dispersion once the water-soluble film opens.

Dry powder chamber

Holds the powder blend at a defined dose. Screen particle size, bulk density and flow, then test moisture migration, caking and dissolution in the sealed pod.

Optional third chamber

Can hold a separate dry blend or an enzyme phase if the performance brief calls for it. Check activity retention, seal integrity and wash performance with all chambers in the final design.

Performance validation

Compare the finished pod with your benchmark.

Run the current product and the new powder–liquid design at their intended doses. Compare fresh and stored pods under the same wash conditions.

Decision
What to compare
What to measure
Liquid and powder processability
Candidate surfactant and powder blends on the intended filling equipment
Liquid viscosity and phase stability, powder flow and fill-weight variation
Cleaning and dissolution
Benchmark and prototype across target stains, water hardness and wash cycles
Stain removal, foam, pod dissolution and fabric residue
Storage and film compatibility
Fresh pods and pods stored in the intended packaging
Moisture migration, powder caking, seal integrity, leakage and retained wash performance
Cost per wash
Designs that meet the same cleaning and storage targets
Total manufactured and packed cost per saleable dose, including production losses

From formulation to production

Develop the formula around the line and the wash.

Unimasses connects surfactant screening, powder selection, chamber design and equipment. We can start with an existing all-liquid pod as a benchmark or develop a new powder–liquid product to meet a defined cleaning and cost target.

Set the benchmark

Screen surfactants

Design the powder blend

Build pod prototypes

Test performance and yield

Plan production

Frequently asked questions

Formulation and production choices.

Here it means the liquid phase is formulated without intentionally added organic solvents such as propylene glycol. Raw materials can contain water or solvent carriers. Verify the full composition and use a claim that matches the finished product.

Develop a solvent-free powder–liquid laundry pod.

Share your current pod format, target cost per wash, wash conditions and production setup. We can define which surfactant and powder options to compare in a finished pod.