Low-temperature laundry technology

More bleaching performance.
At lower temperature.

Combine a low-temperature bleach catalyst with a carefully designed oxygen-bleach system and water-soluble pod technology to develop effective stain removal for lower-temperature laundry.

A SYSTEM DESIGNED TO WORK TOGETHER

CATALYST + BLEACH + POD DESIGN

LOWER-TEMPERATURE WASHING

OXYGEN-BLEACH PERFORMANCE

PRE-MEASURED DELIVERY

The challenge

Lower the temperature. Rethink the system.

Washing at lower temperatures changes the conditions under which ingredients must work. Some stubborn stains can be more difficult to remove when the wash provides less heat to support cleaning.

A low-temperature bleach catalyst offers a way to improve the performance of an oxygen-bleach system under selected wash conditions. Combined with complementary cleaning ingredients, it opens up new possibilities for high-performance unit-dose laundry products.

The goal: design the formula, pod and process as one solution.

Technology at a glance

Four parts. One performance system.

Bleaching performance comes from the interaction of ingredients, formulation and wash conditions—not from a catalyst acting alone.

01 / CATALYST

Low-temperature activity

Supports the action of an oxygen-bleach system under selected lower-temperature conditions.

02 / BLEACH

Oxygen-bleach system

Provides the bleaching action needed to address selected difficult stains.

03 / FORMULA

Complementary cleaning

Surfactants, enzymes and other ingredients can be designed around the wider stain profile.

04 / DELIVERY

Pre-measured pod

Brings a defined dose into a convenient water-soluble format for the intended wash.

How it works

Built for the wash. Designed as a system.

The pod delivers a designed combination of ingredients to the wash. Once the film dissolves, the catalyst works with the oxygen-bleach system to support stain removal under suitable conditions.

01 / DOSE

One measured pod

A defined quantity is introduced into the wash.

02 / RELEASE

Film dissolves

Ingredients become available in the wash liquor.

03 / ACTIVATE

Bleach & catalyst work together

The catalyst helps the oxygen-bleach system perform.

04 / CLEAN

Address target stains

Bleaching and other cleaning mechanisms work together.

Actual dissolution and cleaning performance depend on the product, machine, water and wash programme.

Evidence-informed design

Performance with context.

Reference tests support the potential of the catalyst in specific powder laundry formulations. A finished pod requires its own validation.

01 / STAIN REMOVAL

A broader stain challenge

In reference testing at 30°C, improvements were reported on selected stains, including grass, fat, make-up, chocolate drink, berry juice, red wine and tea. The stain sets used different formulations.

02 / FABRIC

Consider fabric integrity

In a 15-cycle test at 40°C, no fibre damage was reported on the cotton and elastane materials evaluated under the stated test conditions.

03 / COLOUR

Consider colour performance

Reference tests reported less fading for selected colours versus a comparison bleach formulation after 15 cycles at 40°C. Results are specific to the tested dyes and formulations.

From chemistry to delivery

Why bring this into a pod?

A pod can connect the performance design with a simple, pre-measured consumer experience.

Powder–liquid opportunities

Powder and liquid components may be combined in separate chambers where the formulation and equipment support it. This creates options for designing the bleach system alongside other cleaning functions.

Ingredient compatibility

Chamber separation can help manage selected compatibility challenges. Film interaction, moisture, migration and storage stability still need to be tested as a complete product.

Consistent dose

A pre-measured format can deliver the intended amount per wash, while the dose and usage instructions are developed for the target market.

Product development

What needs to be designed?

Performance is shaped by the entire system, from ingredient selection through to storage and use.

Wash conditions

Target temperatures, cycle length, water hardness, load and soil profile.

Bleach system

Ingredient balance and dosage aligned with cleaning targets and compatibility.

Formulation

Ingredient interactions, wash pH, performance and stability of the complete formula.

Pod architecture

Chamber configuration, dose size, filling and separation where useful.

Film & packaging

Film suitability, moisture management, sealing and product protection.

Manufacturing

Powder and liquid dosing, process consistency, equipment and quality control.

From concept to production

Translate a technology into a viable product.

Unimasses connects formulation development, pod engineering and manufacturing requirements. The starting point is your application; the outcome is a product concept assessed against real performance and production needs.

01 Define

02 Formulate

03 Design pod

04 Test

05 Validate

06 Scale

Validation

Measure the finished system.

Testing should reflect the product’s intended use and the claims being considered.

01 / CLEANING

Stain removal

Compare relevant stains and temperatures with an agreed reference product or formulation.

02 / MATERIALS

Fabric & colour

Assess representative fabrics and dyes over appropriate wash cycles.

03 / PRODUCT

Stability & delivery

Check film integrity, ingredient compatibility, dissolution and storage performance.

Frequently asked questions

Questions about the technology.

The catalyst is designed to work with a compatible oxygen-bleach system. It does not replace the need for a suitable bleach source and complete formulation.

Start a conversation

Design a better low-temperature laundry pod.

Tell us about your target market, washing conditions, performance goals and production requirements. Let’s explore a practical route from catalyst to finished product.