Laundry pod technology
Multi-Polymer Performance Boosters
Build laundry pods around complementary polymer functions. Lift selected soils, help keep loosened dirt and dyes from settling on other fabrics, and make oily stains easier to remove from polyester in subsequent washes.
POWDER–LIQUID POD CONCEPT
WATER-SOLUBLE FILM · PRE-MEASURED DOSE
DETERGENCY & SOIL DISPERSION
DYE TRANSFER INHIBITION
SOIL RELEASE ON POLYESTER
Formulation strategy
Design for what happens to soil after it lifts.
Cleaning a garment is only part of the wash. Once soil and dyes enter the wash water, they can settle back onto fabrics. Oily soils on polyester pose a different challenge because they can cling to the fibre and resist removal in the next wash.
Unimasses starts with the fabric mix, stain types and wash conditions. We then select polymers for specific jobs and test how each one contributes alongside the surfactants and any enzymes or oxygen bleach in the formula.
Technology at a glance
Three roles in one wash.
Each role targets a different route by which stains persist or clean fabrics pick up soil or colour.
IN THE WASH WATER
Detergency and anti-redeposition
A detergency booster can support selected surfactant systems and help keep particulate soils, such as clay, dispersed after they leave the fabric. This targets the gradual greying caused by soil settling back onto the load.
BETWEEN GARMENTS
Dye transfer inhibition
A dye transfer inhibitor can interact with selected dyes released into the wash water, reducing the amount available to stain other fabrics. Performance depends on the dye and the detergent system.
ON THE FIBRE SURFACE
Soil release
A soil release polymer can adsorb onto polyester fibres and make the surface more water receptive. This can help oily soils release more readily in later washes. Selected grades may also support stain removal in the current wash.
How it works
From one dose to the next wash.
Deliver one dose
As the water-soluble film dissolves, powder and liquid phases become available to the wash.
Lift and disperse soil
The detergent loosens soil. A compatible polymer helps keep selected particles suspended.
Limit dye pickup
A dye transfer inhibitor acts on selected dyes in the wash water before they can stain other fabrics.
Prepare the fibre surface
A soil release polymer can improve how readily oily soil washes off polyester during subsequent cycles.
These functions can overlap during the main wash. Release behaviour depends on the finished pod, wash cycle and water conditions.
From formulation to delivery
Give each ingredient a suitable phase.
A powder–liquid pod lets formulators combine ingredients with different storage and handling needs in one measured dose. Chamber count follows the formulation and the production process.
Concentrated liquid phase
Screen liquid-compatible polymers in the selected surfactant base. Check water content, viscosity, clarity and phase stability alongside water-soluble film compatibility.
Powder or granule phase
Consider suitable solid polymer grades where dry dosing fits the formulation. Check flow, dosing accuracy and dissolution. If the product includes a dry bleach phase, assess compatibility before deciding which ingredients can share it.
Multi-chamber design
Use a separate chamber where testing shows that isolation helps manage moisture, migration or ingredient interactions during storage. Confirm seal integrity and dissolution using the final pod geometry.
Validation
Measure what each polymer adds.
Compare the base formula, selected individual polymers and the combined system. Confirm the result in the finished pod under the wash conditions shoppers will use.
Performance target | What to compare | What to measure |
|---|---|---|
First-wash cleaning | Representative stains across the intended fabric mix and wash cycle | Stain removal against the same base formula |
Anti-redeposition | Clean test fabrics washed alongside a defined soil load | Soil pickup or greying over repeated washes |
Dye transfer | Selected dye donor fabrics and light-coloured test fabrics | Colour change on the receiving fabrics |
Next-wash soil release | Polyester and relevant blends, with and without prior washes using the polymer system | Removal of oily stains applied after the conditioning washes |
Pod stability and release | Fresh and stored pods in the selected film and packaging | Phase and seal integrity, dissolution and retained wash performance |
From concept to production
Formulate, prototype and validate.
Unimasses connects polymer selection with surfactant formulation, film, chamber design and filling equipment. We can evaluate a new laundry pod or use your existing pod as the development baseline.
Define targets
Screen polymers
Design phases
Prototype
Validate the pod
Plan production
Frequently asked questions
Formulation and pod design.
Use a combination when the formula has multiple performance targets and the blend adds a measurable benefit over the simpler option. Two grades with similar roles can be screened as alternatives.
Develop a polymer-boosted laundry pod.
Share your current pod format, priority stains, fabric mix and target wash cycle. Unimasses can help define the formulation, pod design and validation work for your project.
Español
Polski
Greek
Italiano
Turkish
简体中文
English
